Appliances

Therm 895-1T
Operating pressure 195 bar/2750 psi fully adjustable
(5500 epsi equivalent pressure with the optional DirtKiller at max temp of 80oc)
Nozzle size 25045
Water flow 895 Ltrs/Hr. @ 1400 rpm
Hot water output up to 90c, Steam stage up to 150oc
High pressure chemical/detergent facility
Automatic stop start by use of the trigger gun
Delayed shut down
Pre purging of burner reducing exhaust
Flame failure safety device
Low fuel safety feature
Burner shut down by exhaust over temperature sensor
20m twin wire long life hose on integrated hose reel
Available with 10m high pressure hose and no reel
Supply 415v 12.5 amps 3ph 50 Hz
Connection load 7.5 kw
Motor output 4.6 kw (6.3 HP)
Weight 220 kg
Dimensions 800 x 1200 x 1050 mm (without reel)

Therm 895-1 without Hose reel
Only 3285 +vat SRP


To appreciate the size and quality of the Therm it really needs to be seen. The Therm is a big, solid and very well made machine that weighs over 200 kgs.

The boiler or combustion chamber of this machine is probably the best in use on any make of mobile steam cleaner. The casing is actually machined out of 1/4 inch galvanized plate steel, not formed out of a thin tin like material.

The flame chamber is within an inner cylinder so that the flame does not directly touch the coil. This refinement eliminates sooting up - a common problem with steam cleaners that leads to smokey exhaust, poor efficiency and higher servicing costs.

The Kranzle coil has a huge surface area of over 22 square feet and because both the fuel and air are pre-heated, combustion of the fuel and heating of the water are highly efficient. Care and simple maintenance are taken into account on the Therm, every machine is fitted with both an easy to clean fuel filter and a fuel pressure gauge. Low fuel cut out is standard as is pre-purge venting.

Therms have adjustable pressure up to 2750 psi on 415v 3ph. The output temperature is also adjustable with a steam stage of up to 150oC. Detergents can be used at high pressure giving the maximum cleaning combination of high temperature, high pressure and chemical.

When you let go of the trigger gun the Therm will run in by-pass mode for 20 to 30 seconds so that you have instant high pressure when you pull the trigger. If you are taking a break in cleaning, the machine will switch off to stand by mode but will restart when you go back to it and squeeze the trigger again.

Therms are easy to use, versatile and have long life expectancy. Every effort has been made to make a machine that is the best on the market and yet still be affordable.